80年代土耳其译制电影,80年代外国电影|80年代外国电影有哪些_80年代外国经典电影在线播放地址是多少？

[1]伍林招,張韜,劉熹陽,等.乙醇胺改性聚己內酯制備親水性組織工程支架的研究[J].福建醫藥雜志,2022,44(02):114-116.
　WU Linzhao,ZHANG Tao,LIU Yan,et al.Preparation of hydrophilic tissue engineering scaffold by modified polycaprolactone with ethanolamine[J].FUJIAN MEDICAL JOURNAL,2022,44(02):114-116.
點擊復制

乙醇胺改性聚己內酯制備親水性組織工程支架的研究()
分享到：

《福建醫藥雜志》[ISSN:1002-2600/CN:35-1071/R]

卷:
44
期數:
2022年02期
頁碼:
114-116
欄目:
基礎研究
出版日期:
2022-04-15

文章信息/Info

Title:
Preparation of hydrophilic tissue engineering scaffold by modified polycaprolactone with ethanolamine
文章編號:
1002-2600(2022)02-0114-03
作者:
伍林招; 張韜1; 劉熹陽; 劉巖; 劉楠楠
廈門大學附屬福州第二醫院骨科研究所(福州 350001)
Author(s):
WU Linzhao;  ZHANG Tao;  LIU Yan;  LIU Nannan
Department of Orthopedics Institute, the Fuzhou Second Hospital Affiliated to Xiamen University, Fuzhou, Fujian 350001, China
關鍵詞:
組織工程;  組織修復;  支架
Keywords:
tissue engineering;  tissue repair;  scaffold
分類號:
R318
文獻標志碼:
A
摘要:
目的 探討聚己內酯材料親水性能增強的改性方法及工藝條件,制備有利于細胞黏附的親水性組織工程支架。方法 通過堿性乙醇胺與聚己內酯間發生氨解反應形成酰胺鍵,在聚己內酯表面接枝親水性的氨基和羥基,改善其親水性能。在-80 ℃凝膠化相分離制備類細胞外基質的納米纖維組織工程支架。結果 掃描電子顯微鏡(SEM)圖顯示支架呈多孔狀結構,支架的親水性能增強。結論 當凝膠化為-80 ℃時,類似于細胞外基質的納米纖維狀組織工程支架形成,支架孔隙率均大于80%,改性劑濃度增大支架的親水性增強。
Abstract:
Objective The modification methods and technological conditions of polycaprolactone material with enhanced hydrophilicity were investigated to prepare tissue engineering scaffolds which were beneficial to cell adhesion and growth.Methods The hydrophilic properties of polycaprolactone were improved by grafting hydrophilic amino and hydroxyl groups on the surface of polycaprolactone, which was formed by ammonolysis reaction between ethanolamine and polycaprolactone.The extracellular matrix-like nanofiber tissue engineering scaffolds were prepared by gel phase separation at -80 ℃.Results SEM image showed that the scaffold had a porous structure, and the hydrophilicity of scaffold was enhanced.Conclusion When gelated at -80 ℃, nanofibrous tissue engineering scaffolds similar to extracellular matrix were formed,and the porosity of scaffolds was more than 80%.With the increase of modifier concentration, the hydrophilicity of scaffolds was enhanced.

參考文獻/References:

[1] Abuelreich S, Manikandan M, Mahmood A, et al.Human bone marrow MSCs form cartilage and mineralized tissue on chitosan/polycaprolactone(CS/PCL)combined nanofibrous scaffolds[J].Journal of Nanoscience and Nanotechnology, 2017,16(1):1771-1778.
[2] Pangesty A,Todo M.Preparation and characterization of porous tubular scaffold made of PCL/PLCL blends for vascular tissue engineering[J].Journal of Mechanical Engineering,2017,4(4):34-46.
[3] Carvalho M,Robert J,Vashishth D,et al.Co-culture cell-derived extracellular matrix loaded electrospun microfibrous scaffolds for bone tissue engineering[J].Materials Science &Engineering C, 2019,99(1):479-490.
[4] Xiang P,Wang S S,Li M,et al.The in vitro and in vivo biocompatibility evaluation of electrospun recombinant spider silk protein/PCL/gelatin for small caliber vascular tissue engineering scaffolds[J].Colloids and Surfaces B:Biointerfaces,2018,163(1):19-28.
[5] Langer R,Vacanti J P.Tissue engineering[J].Science,1993,260(1):920-926.
[6] Wang S J,Zhang Z Z,Yu J K,et al.Thermogel coated poly(ε-caprolactone)composite scaffold for enhanced cartilage tissue engineering[J].Polymers,2016,200(8):22-35.
[7] Almeida V T,Cristina M A, Santos A R,et al.Fibrous PCL/PLLAs scaffolds obtained by rotary jet spinning and electrospinning[J].Materials Research,2017,20(2):910-916.
[8] Buscemi S,Palumbo V D,Maffongelli A, et al.A.Electrospun PHEA-PLA/PCL scaffold for vascular regeneraition:A preliminary in vivo evalution[J].Transplantation proceeding, 2017, 49(1):716-721.
[9] Alireza S S,Hashemi A,Tahriri M, et al.Mechanical, material, and biological study of a PCL/bioactive glass bone scaffold:importance of viscoelasticity[J].Materials Science &Engineering C,2018,90(1):280-288.
[10] Kalu S,Ufere J, Sultana N.Fabircation and characteriazation of PCL/HA/PPY composite scaffold using freeze dring technique[J].Journal technologi,2016,78(12):89-94.
[11] Cao L Y,Yu Y M,Wang J, et al.2-N,6-O-sulfated chitosan-assisted BMP-2 immobilization of PCL scaffolds for enhanced osteoinduction[J].Materials Science &Engineering C,2017,74(1):298-306.
[12] Wang H,Wu Y,Shu Z, et al.Investigation of process parameters of electrohydro-dynamic jetting for 3D Printed PCL Fibrous scaffolds with complex geometries[J].International Journal of Bioprinting,2016,2(1):63-71.

備注/Memo

備注/Memo:
基金項目:2020年福州市衛生健康科技創新平臺建設項目(2020-S-wp3)
1 通信作者
更新日期/Last Update: 2022-04-15